ENDORSEMENT STATEMENT by Mike Beland of A1-Cycles
Here’s Mike’s report:
“I’m Mike Beland from A1 Cycles in West Palm Beach, Florida. I have no relationship of any kind with the makers of Love Jugs. A short time ago I did an independent Dyno test, basically, a product test, on the Love Jugs engine cooling system. We put the Love Jugs on a 2013 FLHX Street Glide, fully broken in, with about 1,700 miles on it. What we did on the test was to bring the bike up to a high operating temperature, of almost 400 degrees, that a rider would encounter in a traffic situation. We maxed out the cylinder temperature, maxed out the oil temperature, and got the bike totally heat soaked. Then, with the fans off in the Dyno room, I let the bike idle with the Love Jugs cooling system installed and on. Amazingly enough, within one minute the cylinder temperature dropped 30 – 40 degrees. The oil temperature dropped as well. As we left the bike sitting in idle with the Love Jugs on, the bike actually kept cooling off. Ultimately the temp went down almost 100 degrees before we turned the unit off. Love Jugs is well built, looks cool and it really works. I would recommend Love Jugs.” Mike Beland – A1 Cycles, West Palm Beach, Florida
ENDORSEMENT STATEMENT by Mike Beland of A1-Cycles
5 time Rat Hole Winner Mike Beland was the first outsider to test the Original Love Jugs. Along with many, Mike was skeptical of the claims we were making for our new product. It took less than a minute for Love Jugs to make Mike a believer.